Gorilla Contact Adhesive Crystal Clear 75g

Brand

Gorilla

Features

Holds in Seconds, Incredibly Strong, 100% Waterproof, No-run formula, Repositionable, Permanent Bond, Flexible, Paintable: when fully cured

Pack Size

75

Unit (free text)

g

Ingredients

Contains: (2-(2H-Benzotriazol-2-YL)-P-Cresol

For allergens, see ingredients in bold

Telephone Helpline

+44 (0)843 507 1200

Email Helpline

eucustomercare@gorillaglue.com

Company Name

Gorilla Glue Europe Ltd.

Other Information

©2022 Gorilla Glue Europe

Manufacturers Address

Gorilla Glue Europe Ltd., PO Box 663, Chorley, PR6 6PU, UK.

Preparation and Usage

Prepare All surfaces should be clean and dry. 1 Apply Squeeze tube gently at crimped end to dispense product slowly through nozzle. Do not apply too much pressure to tube. Apply adhesive to each surface to be bonded. Best results achieved when applied at room temperature (10°C to 32°C). 2 Position Allow adhesive to partially dry. a. For Maximum Bond Strength: Wait approximately 2 minutes before joining surfaces. b. For Repositionable Bonds: Wait approximately 1 minute before joining surfaces. Repositionable for 2-4 minutes depending on surface type. 3 Press Press surfaces firmly together. Allow a minimum of 24 hours for full cure. Cure time may increase with lower temperatures and/or when used on non-porous surfaces. Clean-up: Wipe uncured adhesive with a dry cloth and clean with acetone, isopropyl alcohol, or citrus-based solvents according to manufacturer's instructions. Cured adhesive may be removed by scraping from surface.

Storage

After each use, wipe nozzle clean with a dry cloth and replace cap tightly. Store in a cool, dry place away from children and animals.

Further Description

For the toughest jobs on planet earth® Find out more at gorillaglue.com

Return To

Gorilla Glue Europe Ltd., PO Box 663, Chorley, PR6 6PU, UK. +44 (0)843 507 1200

Brand Marketing

Gorilla Contact Adhesive is a flexible, crystal-clear glue that holds in seconds to create a strong, permanent bond which is 100% waterproof and washing machine safe.

Safety Warning

Note: Not for use on food contact surfaces. Do not dry clean. May cause damage to finished surfaces. Gorilla Contact Adhesive Contains: Xylene; Ethylbenzene DANGER. Highly flammable liquid and vapour. Causes skin irritation. If medical advice is needed, have product container or label at hand. Keep out of reach of children. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Wear protective gloves/protective clothing/eye protection/face protection. In case of fire: Use water spray, foam, dry powder or CO₂ to extinguish. Dispose of contents in accordance with local, state or national legislation. Contains: (2-(2H-Benzotriazol-2-YL)-P-Cresol, Trimethoxyvinylsilane). May produce an allergic reaction.

Company Address

PO Box 663, Chorley, PR6 6PU, UK. EU: GG Brands Netherlands, B.V., Lichttoren 32, 5611 BJ, Eindhoven, Netherlands

Provenance Statement

Made in USA